ipmi-fancontrol/power-fancontrol.pl

#!/usr/bin/perl

# notable changes: this uses corsairpsu power to adjust sys fans, see line 
# 59 onwards on re: how to adjust the used sensor.

use strict;
use warnings;
use List::Util qw[min max];

my $min_temp_change     = 3; # °C minimum change to actually cause a fan speed update
my $min_power_change     = 30; # W, minimum change to do something
my $seconds_to_sleep    = 4; # Number of seconds to sleep between update loops

# 0x64 = 100, 0x00 = 0.
# CPU Temp -> Fan Speed Mappings
my %cpu_temp_to_fan_speed;
   $cpu_temp_to_fan_speed{80} = 0x64;
   $cpu_temp_to_fan_speed{75} = 0x62;
   $cpu_temp_to_fan_speed{70} = 0x56;
   $cpu_temp_to_fan_speed{65} = 0x52;
   $cpu_temp_to_fan_speed{60} = 0x48;
   $cpu_temp_to_fan_speed{55} = 0x46;
   $cpu_temp_to_fan_speed{50} = 0x42;
   $cpu_temp_to_fan_speed{45} = 0x40;
   $cpu_temp_to_fan_speed{40} = 0x36;
   $cpu_temp_to_fan_speed{35} = 0x34;
   $cpu_temp_to_fan_speed{30} = 0x32;

# SYS Power -> Fan Speed Mappings
my %sys_power_to_fan_speed;
   $sys_power_to_fan_speed{550} = 0x64;
   $sys_power_to_fan_speed{525} = 0x62;
   $sys_power_to_fan_speed{500} = 0x60;
   $sys_power_to_fan_speed{475} = 0x56;
   $sys_power_to_fan_speed{450} = 0x54;
   $sys_power_to_fan_speed{425} = 0x52;
   $sys_power_to_fan_speed{400} = 0x50;
   $sys_power_to_fan_speed{375} = 0x46;
   $sys_power_to_fan_speed{350} = 0x44;
   $sys_power_to_fan_speed{325} = 0x42;
   $sys_power_to_fan_speed{300} = 0x38;
   $sys_power_to_fan_speed{275} = 0x36;
   $sys_power_to_fan_speed{250} = 0x32;
   $sys_power_to_fan_speed{225} = 0x30;
   $sys_power_to_fan_speed{200} = 0x30;
   $sys_power_to_fan_speed{175} = 0x30;
   $sys_power_to_fan_speed{150} = 0x30;
   $sys_power_to_fan_speed{125} = 0x30;
   $sys_power_to_fan_speed{100} = 0x30;

my $g_current_sys_fan_duty_cycle = 0;
my $g_current_cpu_fan_duty_cycle = 0;
my $g_current_cpu_temp = 0;
my $g_current_sys_power = 0;
my $g_last_set_cpu_temp = 0;
my $g_last_set_sys_power = 0;

sub UpdateFanSpeed {
  my $current_cpu_temp = `sensors k10temp-pci-00c3 | grep 'Tctl:' | cut -c 16-17 | tr -d '\n'`;
  my $current_sys_power = `sensors \$(sensors |grep corsairpsu) | grep 'power total:' | cut -c 14-16 | tr -d '\n'`;
  my $cpu_temp_difference = 0;
  my $sys_power_difference = 0;

  $g_current_cpu_temp = $current_cpu_temp;
  $g_current_sys_power = $current_sys_power;

  my $desired_cpu_fan_speed = 0x0;
  my $desired_sys_fan_speed = 0x0;

  my @cpu_temps = keys %cpu_temp_to_fan_speed;
  for my $cpu_temp (@cpu_temps) {
    if( $current_cpu_temp >= $cpu_temp ) {
      $desired_cpu_fan_speed = max( $cpu_temp_to_fan_speed{ $cpu_temp }, $desired_cpu_fan_speed );
    }
  }

  my @sys_powers = keys %sys_power_to_fan_speed;
  for my $sys_power (@sys_powers) {
  #for my $sys_temp (@sys_temps) {
    if( $current_sys_power >= $sys_power ) {
      $desired_sys_fan_speed = max( $sys_power_to_fan_speed{ $sys_power }, $desired_sys_fan_speed );
    }
  }

  if( $desired_cpu_fan_speed == 0x0 ) {
    print "\n***** ERROR: Failed to determine a desired fan speed. Forcing CPU fans to 100% duty cycle as a safety fallback measure. *****\n";
    $desired_cpu_fan_speed = 0x64;
  }

  if( $desired_sys_fan_speed == 0x0 ) {
    print "\n***** ERROR: Failed to determine a desired fan speed. Forcing SYS fans to 100% duty cycle as a safety fallback measure. *****\n";
    $desired_sys_fan_speed = 0x64;
  }

  $cpu_temp_difference = $g_current_cpu_temp - $g_last_set_cpu_temp;
  $sys_power_difference = $g_current_sys_power - $g_last_set_sys_power;

  if( (abs $sys_power_difference) > $min_power_change ) {
    print "(SYS) Power change of $sys_power_difference W, current $g_current_sys_power W, fan speed set to $desired_sys_fan_speed %\n";

    $g_last_set_sys_power = $g_current_sys_power;
    $g_current_sys_fan_duty_cycle = $desired_sys_fan_speed;

    `ipmitool raw 0x30 0x70 0x66 0x01 0x00 $desired_sys_fan_speed`;
  }

  if(  (abs $cpu_temp_difference) > $min_temp_change ) {
    print "(CPU) Temp change of $cpu_temp_difference °C, current $g_current_cpu_temp °C, fan speed set to $desired_cpu_fan_speed %\n";

    $g_last_set_cpu_temp = $g_current_cpu_temp;
    $g_current_cpu_fan_duty_cycle = $desired_cpu_fan_speed;

    `ipmitool raw 0x30 0x70 0x66 0x01 0x01 $desired_cpu_fan_speed`;
  }

}

print "Setting Fan mode to FULL SPEED.\n";
`ipmitool raw 0x30 0x45 0x01 0x01`;

while( 1 ) {
  UpdateFanSpeed();
  sleep $seconds_to_sleep;
}